Lifting & Storage Equipment

The patented Aardwolf Lifter is an accessory for lifting and moving slab-form loads.  The Aardwolf Lifters incorporate a spring-loaded latch that automatically releases the lifter from the slab once the slab has been fully lowered to the ground.  This makes the process of lifting and lowering of slabs a one-man operation.

Comes in 3 sizes

50mm. For lifting 10 to 50mm thick material (SWL 1200 kg)

60mm. For lifting 10 to 60mm thick material (SWL 1200 kg)

75mm. For lifting 10 to 75 mm thick material. (SWL 1200 kg)

Safety:

 Requires only a small movement of the slab to engage and grip the slab, which is generally well below the over balance angle thus eliminating the danger to the operator.

Size:  

Being of a compact construction, the Aardwolf Lifter 50 allow for close packed slabs to be lifted out of racks and containers.  Lower height slabs placed along side of taller slabs offer no problem, as is the case with scissor clamps.

Versatile:

 Ideal for construction work. Because the clamping mechanism is to the front of the slab, they allow panels to be placed close against walls.

Secure:

The Aardwolf clamps grip slabs firmly. The Aardwolf Lifter 50 has a force multiplying factor of approximately 2.5 to 1.

Volume: 0.0192 M ³ .
 Weight: 19.02 Kgs.

General

For storing and transporting finished work. It is an ideal for transporting and storing material within the factory or transporting material to building sites.  Often people like to have two ‘A’ frames for one base.  They will have one frame on their truck and one in the factory on the base.  When the truck comes back from one job, they will remove the empty frame from the truck, place a full frame on the truck and place the empty frame on the base ready to be reloaded.  It makes sense. Frames can be loaded onto truck by forklift or crane.

Features

• Sturdy and safe structure for material transport
• Covered with special rubber layer for protecting materials
• The frame has two hooking points to hook to overhead crane
• Stick-out handle facilitates material transport

General

The Double Suction Cup HVC05 is suitable for use on glass, tiles, plastic or other smooth surfaced non-porous material and can also be used for pulling out dents.  All are fitted with a rubber seal, which will not damage contact surface during the lifting process.  Hand lift only, must not be used in conjunction with mechanical lifting equipment.

Ideal for on sight drilling.

Locks in place via the suction pump to ensure correct sighting of any hole.

Quick release valve.

Supplied with 2 different size nylon guide rings 30 & 35mm

Simple yet very effective

The fabrication stand is height adjustable by 250mm (10”).  Collapsible for ease of transportation.  Strong and stable making them ideal for on-site or workplace jobs.  Rubberised supports to protect the surface of the stone.

• Height adjustable                                    
• Rubber protected support                                    
• Powder coated                                    
• Lightweight

Used for vertical clamping of marble and granite slabs, the Floor Vice Model 80 is the perfect tool for the stoneworker.  Ideal for polishing individual edges of marble and granite which are held firmly by the jaws.  The Floor Vice Model 80 consists of a powder coated steel base clamp unit, a pair of rubber lined jaws and rubber protected rest.  Volume: 0.0520 M3. Weight: 6.82 Kgs.